TRADE FAIR APPROVED TAPE BLUE 50m

Description

Official Trade Fair Approved Exhibition Carpet Tape. NEC Approved in Europe.

The best exhibition carpet tape for delicate floor surfaces. It is easy to remove and leaves no adhesive residue on the floor.

Properties:

• Tape width: 50mm
• Roll length: 50m
• Tape thickness: 0.110mm
• Adhesion (open side): 5N/cm
• Adhesion (closed side): 18N/cm
• 100% CERTIFIED PEFC

We recommend always testing the low-tack tape in the installation area before starting the actual work. We are not responsible for damage to floor surfaces if the customer has handled the installation of the exhibition carpets themselves.

Also, see the exhibition carpet installation instructions. The instructions are easy to follow and work even if you are a first-timer.

This low-tack exhibition tape is widely approved internationally. If you are installing exhibition carpets abroad, we recommend using this low-tack tape.

**IMPORTANT** Starting September 2024, this tape will no longer be officially licenced/accepted at the NEC. However, it continues to be widely accepted at many other venues globally

Instructions:

First, carefully position the exhibition carpets to be installed in their correct places.
If the booth is made of several strips of exhibition carpet, the seams of the carpets should be butted together, meaning placed directly next to each other.

The exhibition carpet tape is a so-called low-tack tape. Always apply the adhesive surface coming off the roll FIRST to the floor.
The outer edges of the exhibition carpet should be installed so that the tape remains completely hidden.

For the longitudinal seams of the exhibition carpets, the tape should be installed so that it is in the center of the carpet seam.
The adhesive surface that goes on the floor has a low tack, and the surface that goes on the carpet has a significantly stronger adhesive.

Once you have finally positioned the exhibition carpets in the correct places, remove the protective film and press the carpet firmly onto the adhesive surface.
Also, see the exhibition carpet installation instructions. The instructions are easy to follow and work even if you are a first-timer.

We recommend always testing the low-tack tape in the installation area before starting the actual work.
We are not responsible for damage to floor surfaces if the customer has handled the installation of the exhibition carpets themselves.